As a retailer, doing physical counts of inventory probably isn’t on your list of favorite things to do. A tedious task, taking count of store merchandise can take hours, and for some merchants, it also requires closing the store temporarily.
But even if it’s a job that you’re not too fond of, taking a physical count of inventory is a must for any retailer. Keeping a close eye on the stock you have on paper vs. what’s actually in-store enables you to maintain inventory accuracy, spot causes of shrinkage early, and ensure that you always have the right amount of stock at the right time.
To help make this task easier on you, we’ve compiled a few practical pointers on establishing your physical inventory count process, conducting stock counts, and more. Check them out below:
1. Taking a physical count of inventory? Consider cycle counting
Have you ever tried cycle counting (aka partial stock-takes)? It’s the process of partially counting merchandise on a continuous basis so you can monitor stock levels without interrupting store hours. Known as one of the most efficient inventory counting methods for retailers, cycle counting can be done daily or weekly (usually before the store opens) and can free you from having to do full inventory counts.
Philip Pravda of SuitCafe.com highly recommends this method. “I owned four luxury menswear shops, and my method for taking physical inventory was almost daily,” he shares.
“I would choose small sections of the store, or a particular brand of shirt, suit, coat, etc. I would count them up with the style numbers and sizes. Then walk over to my computer and compare. Doing the whole store for a small business is difficult because you are always helping customers and certainly do not want to close early or for a full day to do inventory.”
Similarly, Preston Wily of ecommerce site SewellDirect.com says that conducting partial inventory counts on a continuous basis has worked well for them.
“Our shipping department employees are each assigned a handful of audits to do every week – high volume products come up for audit much more frequently than low-volume sellers, but each product is counted at least once per year,” he says. “We also catch problems a lot sooner which keeps them from becoming huge issues.”
On the other hand, if cycle counting isn’t your cup of tea, or if you feel that you have to do a full inventory count in addition to partial stock takes (as some retailers do), the tips below should make your life easier:
2. Use inventory scanners or other types of stock counting technologies
Traditionally, physical inventory counts are done with a pen and paper. The staff would use a physical inventory count sheet to tally up the products and reconcile the data in their system.
While this method can get the job done, it’s highly inefficient and it requires double entry. Not to mention, since physically counting inventory is already a “manual” task as it is, the last thing you need is to manually tally and record data.
If you’re using a POS or inventory management software, check to see if it offers inventory counting features you can use.
Vend’s Inventory Counts capability, for example, enables retailers to take count of their stock as painlessly as possible. Features like simultaneous stocktakes allow the use of multiple devices to count stock faster, and Vend’s quick scan mode function enables retailers to count inventory by using their barcode scanner or by looking up SKUs.
If you’re already using Vend, check out our new stock taking features and take advantage of them the next time you’re conducting physical inventory counts in your stores.
Other technologies you should consider are:
Scanner app – Digitize the counting process with Scanner, a free mobile app that makes counting inventory a breeze.
Scanner lets you do full and partial inventory counts using your iPhone, iPad, or iPod Touch. Just scan your product barcodes using your device’s camera, and the app will automatically save and record all the necessary product information.
Scanner also syncs completed counts with your Vend account, so once you’re done counting, you can easily update your stock levels.
Not a Vend user? Scanner will create a CSV file that you can easily email to you and your staff.
RFID – Need a more sophisticated tool for inventory counts? Consider RFID technology. Short for Radio Frequency Identification, RFID lets you embed chips into the packaging of your merchandise so you can easily track their location. RFID is really handy, not just from a loss prevention perspective, but also when it comes to maintaining inventory accuracy.
Consider what Mammoth, a sporting goods store in California, does to streamline inventory counts. Instead of doing full inventory counts, the company physically counts its high-ticket, high-shrink items daily and then cycle counts through a percentage of its stock with the goal of counting all its merchandise every two weeks.
Mammoth also uses Truecount RFID software to generate reports of what they have should have on in stock.
“Truecount lets us create a comparison report based on what our computerized inventory system says we have in stock and what we can count,” Mammoth co-owner Phil Hertzog told the NRF. This task is performed after closing, and they reconcile their inventory the following morning to look for discrepancies. If there are any differences, Truecount software tells the staff where the missing items should be so the location can be physically checked.
3. Choose your “counters” wisely
Don’t assign your inventory counts to just any employee. The group conducting your stock counts should consist of seasoned employees as well as those who can provide fresh eyes.
You’ll need seasoned team members, as these employees would be more familiar with your policies and the location of different items. However, someone who’s so used to your store or stockroom may overlook small issues and details, so having people who are a bit new to the team may be beneficial.
4. If you must do a full physical inventory count, schedule it ahead of time
The question of when (and how often) you should conduct full physical inventory counts really depends on you. Some stores do it once a year, others conduct it on a bi-annual basis, while other stores do it more often.
The Retail Doctor, Bob Phibbs, writes on his blog that it’s best to do it on the last weekend of January or at the end of July because your SKUs are potentially at their lowest during these periods.
Whatever you decide, though, you’ll want to settle on a date well in advance (weeks or even months before) and make sure your employees know what’s coming up. At this stage, you need to take down the names of the people who’ll be helping you with your physical inventory count. Make sure they can make themselves available on the decided date.
Ideally, you wouldn’t want to halt store operations, so if you can manage it, schedule your inventory count after business hours. But if this isn’t possible, and you’ll need to close up shop for a day or several hours, be sure to give your customers a heads up.
Alert regulars that you’ll be closed on a certain date, verbally inform people when they’re in your shop, and display a sign outside your store or at the checkout counter detailing the date and times you’ll be closed and why.
5. Map your store
Draw up a map of your store and stock room that illustrates where your products are located. As Phibbs notes, you should “Sketch out the location of every rack, display, wall, and shelf if necessary.”
Doing so will give an at-a-glance view of your store and make it easier for you to assign people to each section so you can determine the best way to go about the counting process (i.e. where to start counting, how to move around the store).
Your map can also serve as a handy checklist when you’re actually counting products. You can mark off the sections that have already been counted, making it easier to see how much you’ve completed.
6. Label boxes and shelves
Don’t go into the task blind. If you’re doing a physical count of your inventory, be sure to mark the boxes or shelves in your stockroom if the products in them aren’t visible.
As the blog Supply Chain Cowboy puts it, “When the time comes to count inventory, having everything in a marked location is a necessity. Those loose boxes and stray pallets without a home are often the problems that come back to haunt you while you try to reconcile. Even if you must make new, temporary locations for the duration of the count, put everything in a well-marked and defined place, and leave it there.”
While you’re at it, make sure everything is where it should be. Walk around the store or stockroom and keep an eye out for items that aren’t in their proper place. Are there tank tops lurking in footwear section? Did someone mislabel a box of merchandise? Be sure to correct these issues before you begin counting.
7. Think about items that are in limbo
When planning your inventory counts, figure out how you’re going to deal with things that are in limbo. These could include merchandise in transit — such as outstanding orders from suppliers or products that have been returned. Ideally, these items should be processed and dealt with before performing the count to avoid any confusion later on.
Ditto for faulty products. If you encounter damaged items before the count takes place, deal with them early on.
8. Orient your staff
See to it that your team is familiar with all of the steps you took above. If you created a map, show it to them and ensure they know where people are assigned.
Did you change the position of certain items or re-labeled boxes and sections? Tell them—or better yet, show them. Take a walk with them on the sales floor or stock room so they can familiarize themselves with everything. This will make the task of actually counting and reconciling much easier.
9. Prepare food and drinks for your staff
Water, sodas, and a few boxes of pizza will go a long way in keeping your employees happy and efficient. Physically counting inventory is a tedious process, so you want your team to stay on top of their game. Keeping them well-fed and watered helps them do just that.
10. Post-count: keep your inventory in check
Finished counting your stock? Take immediate steps to improve your inventory accuracy. Here’s how:
Double-check and audit your counts ASAP – It’s always a good idea to double-check your inventory numbers before updating your stock levels, to make sure everything was counted correctly. And the time to do this is right after you complete your inventory count. The information needs to be fresh in your mind, so avoid postponing your inventory checks and audits.
Pull up inventory reports – Doing so will enable you to analyze the data and see what you can do to improve your business.
This task should be straightforward if your POS or retail management system has reporting and retail analytics capabilities. Just generate the right reports and study the data for actionable insights. Alternatively, you can use a tool like Vend’s free Excel Inventory Template to gain the data and insights you need.
Pinpoint high-risk zones – Use your inventory reports to identify high-risk zones or regions in your stores. Tell your staff about these high-risk areas and figure out how you can minimize losses in those regions.
Compare multiple completed inventory count reports – Once you’ve completed multiple counts over a period of time, it’s beneficial to examine those reports so you can spot patterns. This will help you figure out why losses or discrepancies are taking place, so you can take preventive action for the future.
Comparing past reports with current ones will also help you see if your inventory practices are working. Are discrepancies decreasing over time or not? Whatever the case, the only to find out is to compare the data.
Whether you’re handling inventory management using Excel or are using a retail solution like Vend, stock-taking is a critical part of a running a retail store.
Smooth and painless stocktakes don’t happen by accident. Details are planned well in advance and the products, materials, and tools you’ll be using are prepared beforehand. If you intend to do physical inventory counts anytime soon, be sure to complete the tasks we talked about above. Doing so will make your life so much easier.
Got any other tips for doing physical inventory? Let us know in the comments.
More inventory tips
For detailed instructions on using Inventory Counts in Vend, check out our Help Center article here.
Liked this post? Here’s more inventory-centric content you might enjoy:
- 3 Totally Preventable Causes of Stockouts (and How to Avoid Them)
- Keeping Your Inventory Fresh: 4 Excellent Product and Supplier Sources Retailers Can Tap Into
- The Complete Inventory Management Guide for Retailers
About Francesca Nicasio
Francesca Nicasio is Vend's Retail Expert and Content Strategist. She writes about trends, tips, and other cool things that enable retailers to increase sales, serve customers better, and be more awesome overall. She's also the author of Retail Survival of the Fittest, a free eBook to help retailers future-proof their stores. Connect with her on LinkedIn, Twitter, or Google+.